[PATCH v4 6/7] dt-bindings: gpio: Add bindings for pinctrl based generic gpio driver

[Dan Carpenter]

From: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>

Add a dt binding for the gpio-by-pinctrl driver.  The driver is used
for doing GPIO over the SCMI pinctrl protocol.  There are a few
mandatory properties such as gpio-ranges and ngpios, but it's not
mandatory to specify the pin-mux.

Signed-off-by: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx>
Signed-off-by: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
Reviewed-by: Linus Walleij <linusw@xxxxxxxxxx>
---
v4: Changed additionalProperties: true to false.

    My concern here was that there might be a lot of gpio properties
    which I wasn't familiar with.  To check I did:
        grep :$ Documentation/devicetree/bindings/gpio/* | \
          cut -d : -f 2- | perl -ne 's/[\       ]*//g; print "$_\n"' | \
          sort | uniq -c
    The only property that I decided to add was gpio-line-names.

    Deleted the extra bonus example.

 .../bindings/gpio/pin-control-gpio.yaml       | 59 +++++++++++++++++++
 1 file changed, 59 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/pin-control-gpio.yaml

diff --git a/Documentation/devicetree/bindings/gpio/pin-control-gpio.yaml b/Documentation/devicetree/bindings/gpio/pin-control-gpio.yaml
new file mode 100644
index 000000000000..ebc3fdd039fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/pin-control-gpio.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/pin-control-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pin control based generic GPIO controller
+
+description:
+  The pin control-based GPIO will facilitate a pin controller's ability
+  to drive electric lines high/low and other generic properties of a
+  pin controller to perform general-purpose one-bit binary I/O.
+
+maintainers:
+  - Dan Carpenter <dan.carpenter@xxxxxxxxx>
+
+properties:
+  compatible:
+    const: scmi-pinctrl-gpio
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges: true
+
+  ngpios: true
+
+patternProperties:
+  "^.+-hog(-[0-9]+)?$":
+    type: object
+
+    required:
+      - gpio-hog
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+  - gpio-ranges
+  - ngpios
+
+additionalProperties: false
+
+examples:
+  - |
+    gpio {
+        compatible = "scmi-pinctrl-gpio";
+        gpio-controller;
+        #gpio-cells = <2>;
+        ngpios = <3>;
+        gpio-line-names = "gpio_5_17", "gpio_5_20", "gpio_5_22", "gpio_2_1";
+        gpio-ranges = <&scmi_pinctrl 0 30 4>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&keys_pins>;
+    };
-- 
2.51.0