Re: [PATCH 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with displayport

[Krzysztof Kozlowski]

On 17/03/2026 07:03, Vishnu Saini wrote:
> Monaco-evk has LT8713sx which act as DP to 3 DP output
> converter. Edp PHY from monaco soc is connected to lt8713sx
> as input and output of lt8713sx is connected to 3 mini DP ports.
> 
> Two ports are available in mainboard and one port
> is available on Mezz board.
> 
> lt8713sx is connected to soc over i2c0 and with reset gpio
> connected to pin6 of ioexpander5.
> 
> Enable the edp nodes from monaco and enable lontium lt8713sx
> bridge node.
> 
> Co-developed-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> Signed-off-by: Prahlad Valluru <vvalluru@xxxxxxxxxxxxxxxx>
> Signed-off-by: Vishnu Saini <vishnu.saini@xxxxxxxxxxxxxxxx>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>

How v1 could be reviewed already? v1 is the first posting.


> ---
>  arch/arm64/boot/dts/qcom/monaco-evk.dts | 89 +++++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/monaco.dtsi    |  6 +++
>  2 files changed, 95 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
> index 0b26cc334a69..0ca5615c996d 100644
> --- a/arch/arm64/boot/dts/qcom/monaco-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
> @@ -52,6 +52,30 @@ dmic: audio-codec-0 {
>  		num-channels = <1>;
>  	};
>  
> +	dp-connector0 {

dp-connector-0

> +		compatible = "dp-connector";
> +		label = "DP";
> +		type = "mini";
> +
> +		port {
> +			dp0_connector_in: endpoint {
> +				remote-endpoint = <&lt8713sx_dp0_out>;
> +			};
> +		};
> +	};
> +
> +	dp-connector1 {


dp-connector-1

> +		compatible = "dp-connector";
> +		label = "DP";
> +		type = "mini";
> +
> +		port {
> +			dp1_connector_in: endpoint {
> +				remote-endpoint = <&lt8713sx_dp1_out>;
> +			};
> +		};
> +	};
> +
>  	max98357a: audio-codec-1 {

And here you have example. Write code consistent with the rest.


Best regards,
Krzysztof