[PATCH 2/5] PCI: intel-gw: Enable clock before phy init

[Florian Eckert]

To ensure that the boot sequence is correct, the dwc pcie core clock must
be switched on before phy init call.

This changes are based on patched kernel sources of the MaxLinear SDK,
which can be found at https://github.com/maxlinear/linux

Signed-off-by: Florian Eckert <fe@xxxxxxxxxx>
---
 drivers/pci/controller/dwc/pcie-intel-gw.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
index 3a85bd0ef1b7f9414ce19fe56d82a78e34e9b648..6110a8adb8732dbbd5e9e2db68a0606ccf032ae1 100644
--- a/drivers/pci/controller/dwc/pcie-intel-gw.c
+++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
@@ -292,13 +292,9 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 
 	intel_pcie_core_rst_assert(pcie);
 	intel_pcie_device_rst_assert(pcie);
-
-	ret = phy_init(pcie->phy);
-	if (ret)
-		return ret;
-
 	intel_pcie_core_rst_deassert(pcie);
 
+	/* Controller clock must be provided earlier than PHY */
 	ret = clk_prepare_enable(pcie->core_clk);
 	if (ret) {
 		dev_err(pcie->pci.dev, "Core clock enable failed: %d\n", ret);
@@ -307,13 +303,17 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 
 	pci->atu_base = pci->dbi_base + 0xC0000;
 
+	ret = phy_init(pcie->phy);
+	if (ret)
+		goto phy_err;
+
 	intel_pcie_ltssm_disable(pcie);
 	intel_pcie_link_setup(pcie);
 	intel_pcie_init_n_fts(pci);
 
 	ret = dw_pcie_setup_rc(&pci->pp);
 	if (ret)
-		goto app_init_err;
+		goto phy_err;
 
 	dw_pcie_upconfig_setup(pci);
 
@@ -322,13 +322,13 @@ static int intel_pcie_host_setup(struct intel_pcie *pcie)
 
 	ret = dw_pcie_wait_for_link(pci);
 	if (ret)
-		goto app_init_err;
+		goto phy_err;
 
 	intel_pcie_core_irq_enable(pcie);
 
 	return 0;
 
-app_init_err:
+phy_err:
 	clk_disable_unprepare(pcie->core_clk);
 clk_err:
 	intel_pcie_core_rst_assert(pcie);

-- 
2.47.3