[PATCH v2 0/6] Subject: [PATCH 0/6] Add audio support for QCS6490 Thundercomm RubikPi3

[Hongyang Zhao]

This series adds audio support for the Thundercomm RubikPi3 board
(QCS6490-based) using AudioReach.

The changes include:
- Document the missing everest,jack-detect-inverted DT binding property
  for the ES8316 codec
- Improve the ES8316 codec driver to auto-detect sysclk from MCLK when
  not explicitly set
- Add MCLK clock IDs to the QDSP6 PRM clock driver
- Enable MI2S jack detection in the Qualcomm common sound driver
- Set codec DAI format for MI2S links in the sc8280xp machine driver
- Add DTS nodes for audio on RubikPi3

Currently only headphone playback and recording via ES8316 have been
validated. HDMI audio and 40-pin I2S are not yet functional due to
upstream LPASS MI2S channel support still being a work in progress.

Signed-off-by: Hongyang Zhao <hongyang.zhao@xxxxxxxxxxxxxxx>
---
Changes in v2:
- Move the retrieval of the mclk rate for the es8316 codec to the es8316_probe() function
- Drop [PATCH 3/6] ASoC: qdsp6: q6prm: Add MCLK and internal digital codec core clock IDs
  and use the patches previously sent by Neil instead: https://lkml.org/lkml/2025/10/6/828
- Modify the device tree:
    1. Swap the positions of the spdif_tx and spdif_rx nodes.
    2. Adjust the order of properties under the sound node and add necessary blank lines.
    3. Merge gpios with the same configuration into a single node: lpass_qua_mi2s_data
    4. Change es8316: es8316@11 to es8316: audio-codec@11
- Link to v1: https://lore.kernel.org/r/20260305-rubikpi-next-20260304-v1-0-327595a4528a@xxxxxxxxxxxxxxx

---
Hongyang Zhao (6):
      ASoC: dt-bindings: es8316: Document everest,jack-detect-inverted property
      ASoC: es8316: Get sysclk rate from MCLK clock when not explicitly set
      ASoC: qcom: qdsp6: q6prm: add the missing MCLK clock IDs
      ASoC: qcom: common: Add MI2S port IDs to jack setup
      ASoC: qcom: sc8280xp: Set codec DAI format for MI2S links
      arm64: dts: qcom: qcs6490-rubikpi3: Add audio support

 .../devicetree/bindings/sound/everest,es8316.yaml  |   5 +
 .../boot/dts/qcom/qcs6490-thundercomm-rubikpi3.dts | 191 +++++++++++++++++++++
 sound/soc/codecs/es8316.c                          |   3 +
 sound/soc/qcom/common.c                            |   2 +
 sound/soc/qcom/qdsp6/q6prm-clocks.c                |   5 +
 sound/soc/qcom/qdsp6/q6prm.h                       |  11 ++
 sound/soc/qcom/sc8280xp.c                          |   4 +
 7 files changed, 221 insertions(+)
---
base-commit: fc7b1a72c6cd5cbbd989c6c32a6486e3e4e3594d
change-id: 20260305-rubikpi-next-20260304-7f91c9380dee

Best regards,
-- 
Hongyang Zhao <hongyang.zhao@xxxxxxxxxxxxxxx>