Re: [PATCH 1/1] arm64: dts: qcom: purwa-iot-evk: Enable UFS

[Manivannan Sadhasivam]

On Tue, Mar 17, 2026 at 12:43:11PM +0530, Pradeep P V K wrote:
> Enable UFS for purwa-iot-evk board.
> 
> Signed-off-by: Pradeep P V K <pradeep.pragallapati@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/purwa-iot-evk.dts | 18 ++++++++++++++++++
>  1 file changed, 18 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
> index fe539b1f4567..e9cf56a415ac 100644
> --- a/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
> +++ b/arch/arm64/boot/dts/qcom/purwa-iot-evk.dts
> @@ -1497,6 +1497,24 @@ &uart21 {
>  	status = "okay";
>  };
>  
> +&ufs_mem_phy {

Nodes should be sorted alphabetically.

- Mani

> +	vdda-phy-supply = <&vreg_l3i_0p8>;
> +	vdda-pll-supply = <&vreg_l3e_1p2>;
> +
> +	status = "okay";
> +};
> +
> +&ufs_mem_hc {
> +	reset-gpios = <&tlmm 238 GPIO_ACTIVE_LOW>;
> +
> +	vcc-supply = <&vreg_l17b_2p5>;
> +	vcc-max-microamp = <1300000>;
> +	vccq-supply = <&vreg_l2i_1p2>;
> +	vccq-max-microamp = <1200000>;
> +
> +	status = "okay";
> +};
> +
>  &usb_1_ss0_dwc3_hs {
>  	remote-endpoint = <&pmic_glink_ss0_hs_in>;
>  };
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்