Re: [PATCH v5 09/15] arch/powerpc: don't initialize kasan if it's disabled

[Sourabh Jain]

On 12/03/26 16:53, Christophe Leroy (CS GROUP) wrote:
> Le 12/03/2026 à 12:12, Sourabh Jain a écrit :
> > On 25/02/26 13:44, Baoquan He wrote:
> > > Here, kasan is disabled if specified 'kasan=off' in kernel cmdline.
> > >
> > > This includes 32bit, book3s/64 and book3e/64.
> > >
> > > Signed-off-by: Baoquan He <bhe@xxxxxxxxxx>
> > > Cc: linuxppc-dev@xxxxxxxxxxxxxxxx
> > > ---
> > >   arch/powerpc/mm/kasan/init_32.c        | 6 +++++-
> > >   arch/powerpc/mm/kasan/init_book3e_64.c | 4 ++++
> > >   arch/powerpc/mm/kasan/init_book3s_64.c | 4 ++++
> > >   3 files changed, 13 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/powerpc/mm/kasan/init_32.c 
> > > b/arch/powerpc/mm/kasan/ init_32.c
> > > index 1d083597464f..0ea2a636c992 100644
> > > --- a/arch/powerpc/mm/kasan/init_32.c
> > > +++ b/arch/powerpc/mm/kasan/init_32.c
> > > @@ -141,6 +141,10 @@ void __init kasan_init(void)
> > >       u64 i;
> > >       int ret;
> > > +    /* If KASAN is disabled via command line, don't initialize it. */
> > > +    if (kasan_arg_disabled)
> > > +        return;
> > > +
> > >       for_each_mem_range(i, &base, &end) {
> > >           phys_addr_t top = min(end, total_lowmem);
> > > @@ -170,7 +174,7 @@ void __init kasan_init(void)
> > >   void __init kasan_late_init(void)
> > >   {
> > > -    if (IS_ENABLED(CONFIG_KASAN_VMALLOC))
> > > +    if (IS_ENABLED(CONFIG_KASAN_VMALLOC) && kasan_enabled())
> > >           kasan_unmap_early_shadow_vmalloc();
> > >   }
> > > diff --git a/arch/powerpc/mm/kasan/init_book3e_64.c 
> > > b/arch/powerpc/mm/ kasan/init_book3e_64.c
> > > index 0d3a73d6d4b0..fbe4c9a7e460 100644
> > > --- a/arch/powerpc/mm/kasan/init_book3e_64.c
> > > +++ b/arch/powerpc/mm/kasan/init_book3e_64.c
> > > @@ -111,6 +111,10 @@ void __init kasan_init(void)
> > >       u64 i;
> > >       pte_t zero_pte = pfn_pte(virt_to_pfn(kasan_early_shadow_page), 
> > > PAGE_KERNEL_RO);
> > > +    /* If KASAN is disabled via command line, don't initialize it. */
> > > +    if (kasan_arg_disabled)
> > > +        return;
> > > +
> > >       for_each_mem_range(i, &start, &end)
> > >           kasan_init_phys_region(phys_to_virt(start), 
> > > phys_to_virt(end));
> > > diff --git a/arch/powerpc/mm/kasan/init_book3s_64.c 
> > > b/arch/powerpc/mm/ kasan/init_book3s_64.c
> > > index dcafa641804c..f7906f9ef9be 100644
> > > --- a/arch/powerpc/mm/kasan/init_book3s_64.c
> > > +++ b/arch/powerpc/mm/kasan/init_book3s_64.c
> > > @@ -54,6 +54,10 @@ void __init kasan_init(void)
> > >       u64 i;
> > >       pte_t zero_pte = pfn_pte(virt_to_pfn(kasan_early_shadow_page), 
> > > PAGE_KERNEL);
> > > +    /* If KASAN is disabled via command line, don't initialize it. */
> > > +    if (kasan_arg_disabled)
> > > +        return;
> > > +
> > >       if (!early_radix_enabled()) {
> > >           pr_warn("KASAN not enabled as it requires radix!");
> > >           return;
> >
> > Should we log in the kernel log buffer that KASAN is disabled?
> >
> > Right now, I don't see the kernel advertising the same.
>
> When KASAN is enabled it is advertised with:
>
>     pr_info("KernelAddressSanitizer initialized (generic)\n");
>
> Isn't the absence of that message enough to understand KASAN is not 
> there ?

Yes this should work. Thanks.


- Sourabh Jain


> > $ dmesg | grep -i kasan
> > [    0.000000] Kernel command line: BOOT_IMAGE=(ieee1275//vdevice/v- 
> > scsi@30000070/disk@8100000000000000,msdos2)/vmlinuz-7.0.0-rc3+ 
> > crashkernel=2G kasan=off
> >
> > Tested this series on powerpc Pseries platform.
> > So feel free to add:
> > Tested-by: Sourabh Jain <sourabhjain@xxxxxxxxxxxxx>
> >
> > - Sourabh Jain