[PATCH v2 1/3] dt-bindings: PCI: mediatek: Add support for EcoNet EN7528

[Caleb James DeLisle]

Introduce EcoNet EN7528 SoC compatible in MediaTek PCIe controller
binding.

EcoNet PCIe controller has the same configuration model as
Mediatek v2 but is initiallized more similarly to an MT7621
PCIe.

Signed-off-by: Caleb James DeLisle <cjd@xxxxxxxx>
---
 .../bindings/pci/mediatek-pcie.yaml           | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)

diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml
index 0b8c78ec4f91..bac6e3c84752 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.yaml
@@ -14,6 +14,7 @@ properties:
     oneOf:
       - enum:
           - airoha,an7583-pcie
+          - econet,en7528-pcie
           - mediatek,mt2712-pcie
           - mediatek,mt7622-pcie
           - mediatek,mt7629-pcie
@@ -226,6 +227,31 @@ allOf:
 
         mediatek,pbus-csr: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: econet,en7528-pcie
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          maxItems: 1
+
+        reset: false
+
+        reset-names: false
+
+        power-domain: false
+
+        mediatek,pbus-csr: false
+
+      required:
+        - phys
+        - phy-names
+
 unevaluatedProperties: false
 
 examples:
@@ -436,3 +462,59 @@ examples:
             };
         };
     };
+
+  # EN7528
+  - |
+    #include <dt-bindings/interrupt-controller/mips-gic.h>
+    #include <dt-bindings/clock/en7523-clk.h>
+    #include <dt-bindings/reset/airoha,en7523-reset.h>
+
+    soc_3 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        pcie@1fb81000 {
+          compatible = "econet,en7528-pcie";
+          device_type = "pci";
+          linux,pci-domain = <0>;
+          #address-cells = <3>;
+          #size-cells = <2>;
+
+          reg = <0x1fb81000 0x1000>;
+          reg-names = "port0";
+
+          clocks = <&scuclk EN7523_CLK_PCIE>;
+          clock-names = "sys_ck0";
+
+          phys = <&pcie_phy0>;
+          phy-names = "pcie-phy0";
+
+          ranges = <0x01000000 0 0x00000000 0x1f600000 0 0x00010000>,
+                   <0x82000000 0 0x20000000 0x20000000 0 0x08000000>;
+
+          interrupt-parent = <&intc>;
+          interrupts = <23>;
+          interrupt-names = "pcie_irq";
+          bus-range = <0x00 0xff>;
+          #interrupt-cells = <1>;
+          interrupt-map-mask = <0 0 0 7>;
+          interrupt-map = <0 0 0 1 &pcie_intc 0>,
+              <0 0 0 2 &pcie_intc 1>,
+              <0 0 0 3 &pcie_intc 2>,
+              <0 0 0 4 &pcie_intc 3>;
+
+          pcie_intc: interrupt-controller {
+            interrupt-controller;
+            #address-cells = <0>;
+            #interrupt-cells = <1>;
+          };
+
+          slot0: pcie@0,0 {
+            device_type = "pci";
+            reg = <0x0000 0 0 0 0>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            ranges;
+          };
+        };
+    };
-- 
2.39.5