Re: [PATCH v4 09/10] media: i2c: ov9282: add strobe_source v4l2 control

[Sakari Ailus]

Hi Richard,

On Wed, May 07, 2025 at 09:51:38AM +0200, Richard Leitner wrote:
> Add read-only V4L2_CID_FLASH_STROBE_SOURCE control. Its value is fixed
> to V4L2_FLASH_STROBE_SOURCE_EXTERNAL as the camera sensor triggers the
> strobe based on its register settings.

Is strobe source control relevant for the sensor? It's triggering the flash
but the flash LED isn't connected to it, is it?

> 
> Signed-off-by: Richard Leitner <richard.leitner@xxxxxxxxx>
> ---
>  drivers/media/i2c/ov9282.c | 11 ++++++++++-
>  1 file changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/i2c/ov9282.c b/drivers/media/i2c/ov9282.c
> index 0bbdf08d7cda8f72e05fdc292aa69a4c821e4e03..09d522d5977ec6fb82028ddb6015f05c9328191d 100644
> --- a/drivers/media/i2c/ov9282.c
> +++ b/drivers/media/i2c/ov9282.c
> @@ -1368,11 +1368,12 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
>  	struct v4l2_ctrl_handler *ctrl_hdlr = &ov9282->ctrl_handler;
>  	const struct ov9282_mode *mode = ov9282->cur_mode;
>  	struct v4l2_fwnode_device_properties props;
> +	struct v4l2_ctrl *ctrl;
>  	u32 hblank_min;
>  	u32 lpfr;
>  	int ret;
>  
> -	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 12);
> +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 13);
>  	if (ret)
>  		return ret;
>  
> @@ -1447,6 +1448,14 @@ static int ov9282_init_controls(struct ov9282 *ov9282)
>  	v4l2_ctrl_new_std(ctrl_hdlr, &ov9282_ctrl_ops, V4L2_CID_FLASH_DURATION,
>  			  0, 13900, 1, 8);
>  
> +	ctrl = v4l2_ctrl_new_std_menu(ctrl_hdlr, &ov9282_ctrl_ops,
> +				      V4L2_CID_FLASH_STROBE_SOURCE,
> +				      V4L2_FLASH_STROBE_SOURCE_EXTERNAL,
> +				      ~(1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL),
> +				      V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
> +	if (ctrl)
> +		ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
>  	ret = v4l2_fwnode_device_parse(ov9282->dev, &props);
>  	if (!ret) {
>  		/* Failure sets ctrl_hdlr->error, which we check afterwards anyway */
> 

-- 
Regards,

Sakari Ailus