Re: [PATCH v4 4/5] arm64: dts: ipq5018: Add CMN PLL node

[Konrad Dybcio]

On 5/16/25 2:36 PM, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@xxxxxxxxxxx>
> 
> Add CMN PLL node for enabling output clocks to the networking
> hardware blocks on IPQ5018 devices.
> 
> The reference clock of CMN PLL is routed from XO to the CMN PLL
> through the internal WiFi block.
> .XO (48 MHZ) --> WiFi (multiplier/divider)--> 96 MHZ to CMN PLL.
> 
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
> ---

Modulo the clock rates which I can't find a reference for

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad