Re: [net-next v1] net: wwan: t7xx: Parameterize data plane RX BAT and FAG count

[Jakub Kicinski]

On Fri, 16 May 2025 11:46:57 +0800 Jinjian Song wrote:
> >Module parameters are discouraged, they are pretty poor as an API since
> >they apply to all devices in the system. Can you describe what "frg"
> >and "bat" are ? One of the existing APIs likely covers them.
> >Please also describe the scope (are they per netdev or some sort of
> >device level params)?  
> 
> MTK t7xx data plane hardware use BAT (Buffer Address Table) and FRG (Fragment) BAT
> to describle and manager RX buffer, these buffers will apply for a fixed size after
> the driver probe, and accompany the life cycle of the driver.
> 
> On some platforms, especially those that use swiotlb to manager buffers, without
> changing the buffer pool provided by swiotlb, it's needed to adjust the buffers
> used by the driver to meet the requirements.
> So parameterize these buffers applicable to the MTK t7xx driver to facilitate
> different platforms to work with different configurations. 

Have you looked at
https://docs.kernel.org/networking/ethtool-netlink.html#rings-set 
?