[PATCH v3 1/2] iio: accel: fxls8962af: Fix temperature calculation

[Sean Nyekjaer]

According to spec temperature should be returned in milli degrees Celsius.
Add in_temp_scale to calculate from Celsius to milli Celsius.

Fixes: a3e0b51884ee ("iio: accel: add support for FXLS8962AF/FXLS8964AF accelerometers")
Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@xxxxxxxxx>
Signed-off-by: Sean Nyekjaer <sean@xxxxxxxxxx>
---
 drivers/iio/accel/fxls8962af-core.c | 14 ++++++++++++--
 1 file changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/accel/fxls8962af-core.c b/drivers/iio/accel/fxls8962af-core.c
index bf1d3923a181798a1c884ee08b62d86ab5aed26f..27165a14a4802bdecd9a89c38c6cda294088c5c8 100644
--- a/drivers/iio/accel/fxls8962af-core.c
+++ b/drivers/iio/accel/fxls8962af-core.c
@@ -23,6 +23,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regmap.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 #include <linux/iio/buffer.h>
 #include <linux/iio/events.h>
@@ -439,8 +440,16 @@ static int fxls8962af_read_raw(struct iio_dev *indio_dev,
 		*val = FXLS8962AF_TEMP_CENTER_VAL;
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-		return fxls8962af_read_full_scale(data, val2);
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 2 * MSEC_PER_SEC;
+			return IIO_VAL_INT;
+		case IIO_ACCEL:
+			*val = 0;
+			return fxls8962af_read_full_scale(data, val2);
+		default:
+			return -EINVAL;
+		}
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		return fxls8962af_read_samp_freq(data, val, val2);
 	default:
@@ -736,6 +745,7 @@ static const struct iio_event_spec fxls8962af_event[] = {
 	.type = IIO_TEMP, \
 	.address = FXLS8962AF_TEMP_OUT, \
 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+			      BIT(IIO_CHAN_INFO_SCALE) | \
 			      BIT(IIO_CHAN_INFO_OFFSET),\
 	.scan_index = -1, \
 	.scan_type = { \

-- 
2.47.1