[PATCH v4 1/5] dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus

[Viken Dadhaniya]

Introduce a new YAML schema for QUP-supported peripherals. Define common
properties used across QUP-supported peripherals.

Add property `qcom,enable-gsi-dma` to configure the Serial Engine (SE) for
QCOM GPI DMA mode.

Reference the common schema YAML in the GENI I2C, SPI, and SERIAL YAML
files.

Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
---
v1 -> v2:

- Update qcom,gsi-dma-allowed property name to qcom,enable-gsi-dma.
- Remove full stop form title.
- Add reference of common schema YAML in the I2C, SPI, and SERIAL YAML files.

v1 Link: https://lore.kernel.org/linux-arm-msm/20250303124349.3474185-3-quic_vdadhani@xxxxxxxxxxx/
---
---
 .../bindings/i2c/qcom,i2c-geni-qcom.yaml      |  1 +
 .../serial/qcom,serial-geni-qcom.yaml         |  1 +
 .../soc/qcom/qcom,se-common-props.yaml        | 26 +++++++++++++++++++
 .../bindings/spi/qcom,spi-geni-qcom.yaml      |  1 +
 4 files changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 9f66a3bb1f80..51534953a69c 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -75,6 +75,7 @@ required:
 
 allOf:
   - $ref: /schemas/i2c/i2c-controller.yaml#
+  - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
index dd33794b3534..ed7b3909d87d 100644
--- a/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/serial/qcom,serial-geni-qcom.yaml
@@ -12,6 +12,7 @@ maintainers:
 
 allOf:
   - $ref: /schemas/serial/serial.yaml#
+  - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
new file mode 100644
index 000000000000..044eea4bb960
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,se-common-props.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,se-common-props.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: QUP Peripheral-specific properties for I2C, SPI and SERIAL bus
+
+description:
+  The Generic Interface (GENI) based Qualcomm Universal Peripheral (QUP) is
+  a programmable module that supports a wide range of serial interfaces
+  such as UART, SPI, I2C, I3C, etc. This defines the common properties used
+  across QUP-supported peripherals.
+
+maintainers:
+  - Mukesh Kumar Savaliya <quic_msavaliy@xxxxxxxxxxx>
+  - Viken Dadhaniya <quic_vdadhani@xxxxxxxxxxx>
+
+properties:
+  qcom,enable-gsi-dma:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Configure the Serial Engine (SE) to transfer data in QCOM GPI DMA mode.
+      By default, FIFO mode (PIO/CPU DMA) will be selected.
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
index 2e20ca313ec1..d12c5a060ed0 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml
@@ -25,6 +25,7 @@ description:
 
 allOf:
   - $ref: /schemas/spi/spi-controller.yaml#
+  - $ref: /schemas/soc/qcom/qcom,se-common-props.yaml#
 
 properties:
   compatible:
-- 
2.34.1