Re: [PATCH] riscv: dts: starfive: jh7110-common: use macros for MMC0 pins

[E Shattow]

On 4/23/25 23:06, Icenowy Zheng wrote:
> The pin names of MMC0 pinmux is defined in the pinctrl dt binding header
> associated with starfive,jh7110-pinctrl .
> 
> Include the header file and use these names instead of raw numbers for
> defining MMC0 pinmux.
> 
> Signed-off-by: Icenowy Zheng <uwu@xxxxxxxxxx>
> ---
> This is only a prettying commit. The resulting DTB files have the same
> content with or without this patch (verified by doing sha256sum on
> arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-v1.3b.dtb).
> 
>  .../boot/dts/starfive/jh7110-common.dtsi      | 21 ++++++++++---------
>  1 file changed, 11 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> index c2f70f5e2918f..a2c72b385a905 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
> @@ -8,6 +8,7 @@
>  #include "jh7110.dtsi"
>  #include "jh7110-pinfunc.h"
>  #include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
>  
>  / {
>  	aliases {
> @@ -428,16 +429,16 @@ GPOEN_ENABLE,
>  		};
>  
>  		mmc-pins {
> -			pinmux = <PINMUX(64, 0)>,
> -				 <PINMUX(65, 0)>,
> -				 <PINMUX(66, 0)>,
> -				 <PINMUX(67, 0)>,
> -				 <PINMUX(68, 0)>,
> -				 <PINMUX(69, 0)>,
> -				 <PINMUX(70, 0)>,
> -				 <PINMUX(71, 0)>,
> -				 <PINMUX(72, 0)>,
> -				 <PINMUX(73, 0)>;
> +			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
> +				 <PINMUX(PAD_SD0_CMD, 0)>,
> +				 <PINMUX(PAD_SD0_DATA0, 0)>,
> +				 <PINMUX(PAD_SD0_DATA1, 0)>,
> +				 <PINMUX(PAD_SD0_DATA2, 0)>,
> +				 <PINMUX(PAD_SD0_DATA3, 0)>,
> +				 <PINMUX(PAD_SD0_DATA4, 0)>,
> +				 <PINMUX(PAD_SD0_DATA5, 0)>,
> +				 <PINMUX(PAD_SD0_DATA6, 0)>,
> +				 <PINMUX(PAD_SD0_DATA7, 0)>;
>  			bias-pull-up;
>  			drive-strength = <12>;
>  			input-enable;

Ref:
https://lore.kernel.org/lkml/ZQ2PR01MB1307BD49C0A49DAD3AA76049E600A@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
"[PATCH] riscv: dts: starfive: jh7110-common: Use named definition for
mmc1 card detect"

Thanks for taking this. Read previous comments from Hal there is yet
some description in dts/upstream/src/riscv/starfive/jh7110-pinfunc.h
that needs to change / be improved on.



-E