Re: [PATCH V3 5/9] phy: qcom-qmp-ufs: Remove qmp_ufs_com_init()

[Nitin Rawat]

On 4/11/2025 4:26 PM, Dmitry Baryshkov wrote:
> On Fri, 11 Apr 2025 at 13:42, Nitin Rawat <quic_nitirawa@xxxxxxxxxxx> wrote:
> > On 4/11/2025 1:39 AM, Dmitry Baryshkov wrote:
> > > On Thu, Apr 10, 2025 at 02:30:58PM +0530, Nitin Rawat wrote:
> > > > Simplify the qcom ufs phy driver by inlining qmp_ufs_com_init() into
> > > > qmp_ufs_power_on(). This change removes unnecessary function calls and
> > > > ensures that the initialization logic is directly within the power-on
> > > > routine, maintaining the same functionality.
> > >
> > > Which problem is this patch trying to solve?
> >
> > Hi Dmitry,
> >
> > As part of the patch, I simplified the code by moving qmp_ufs_com_init
> > inline to qmp_ufs_power_on, since qmp_ufs_power_on was merely calling
> > qmp_ufs_com_init. This change eliminates unnecessary function call.
>
> You again are describing what you did. Please start by stating the
> problem or the issue.
>
> >
Hi Dmitry,

Sure, will update the commit with "problem" first in the next patchset 
when I post.

Thanks,
Nitin

> > Regards,
> > Nitin
> >
> >
> >
> > > > Signed-off-by: Nitin Rawat <quic_nitirawa@xxxxxxxxxxx>
> > > > ---
> > > >    drivers/phy/qualcomm/phy-qcom-qmp-ufs.c | 44 ++++++++++---------------
> > > >    1 file changed, 18 insertions(+), 26 deletions(-)
> > > >
> > > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > > index 12dad28cc1bd..2cc819089d71 100644
> > > > --- a/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-ufs.c
> > > > @@ -1757,31 +1757,6 @@ static void qmp_ufs_init_registers(struct qmp_ufs *qmp, const struct qmp_phy_cfg
> > > >       qmp_ufs_init_all(qmp, &cfg->tbls_hs_b);
> > > >    }
> > > >
> > > > -static int qmp_ufs_com_init(struct qmp_ufs *qmp)
> > > > -{
> > > > -    const struct qmp_phy_cfg *cfg = qmp->cfg;
> > > > -    void __iomem *pcs = qmp->pcs;
> > > > -    int ret;
> > > > -
> > > > -    ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> > > > -    if (ret) {
> > > > -            dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> > > > -            return ret;
> > > > -    }
> > > > -
> > > > -    ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
> > > > -    if (ret)
> > > > -            goto err_disable_regulators;
> > > > -
> > > > -    qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
> > > > -
> > > > -    return 0;
> > > > -
> > > > -err_disable_regulators:
> > > > -    regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> > > > -
> > > > -    return ret;
> > > > -}
> > > >
> > > >    static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
> > > >    {
> > > > @@ -1799,10 +1774,27 @@ static int qmp_ufs_com_exit(struct qmp_ufs *qmp)
> > > >    static int qmp_ufs_power_on(struct phy *phy)
> > > >    {
> > > >       struct qmp_ufs *qmp = phy_get_drvdata(phy);
> > > > +    const struct qmp_phy_cfg *cfg = qmp->cfg;
> > > > +    void __iomem *pcs = qmp->pcs;
> > > >       int ret;
> > > > +
> > > >       dev_vdbg(qmp->dev, "Initializing QMP phy\n");
> > > >
> > > > -    ret = qmp_ufs_com_init(qmp);
> > > > +    ret = regulator_bulk_enable(cfg->num_vregs, qmp->vregs);
> > > > +    if (ret) {
> > > > +            dev_err(qmp->dev, "failed to enable regulators, err=%d\n", ret);
> > > > +            return ret;
> > > > +    }
> > > > +
> > > > +    ret = clk_bulk_prepare_enable(qmp->num_clks, qmp->clks);
> > > > +    if (ret)
> > > > +            goto err_disable_regulators;
> > > > +
> > > > +    qphy_setbits(pcs, cfg->regs[QPHY_PCS_POWER_DOWN_CONTROL], SW_PWRDN);
> > > > +    return 0;
> > > > +
> > > > +err_disable_regulators:
> > > > +    regulator_bulk_disable(cfg->num_vregs, qmp->vregs);
> > > >       return ret;
> > > >    }
> > > >
> > > > --
> > > > 2.48.1