[RFC 5/5] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>

First usb and third pcie controller on mt7988 need a xs-phy to work
properly.

Signed-off-by: Frank Wunderlich <frank-w@xxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 39 +++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 88b56a24efca..10525d977007 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -334,6 +334,8 @@ usb@11190000 {
 				 <&infracfg CLK_INFRA_133M_USB_HCK>,
 				 <&infracfg CLK_INFRA_USB_XHCI>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&xphyu2port0 PHY_TYPE_USB2>,
+			       <&xphyu3port0 PHY_TYPE_USB3>;
 			status = "disabled";
 		};
 
@@ -398,6 +400,9 @@ pcie2: pcie@11280000 {
 			pinctrl-0 = <&pcie2_pins>;
 			status = "disabled";
 
+			phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+			phy-names = "pcie-phy";
+
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			interrupt-map = <0 0 0 1 &pcie_intc2 0>,
@@ -548,6 +553,40 @@ tphyu3port0: usb-phy@11c50700 {
 			};
 		};
 
+		topmisc: power-controller@11d10000 {
+			compatible = "mediatek,mt7988-topmisc", "syscon",
+				     "mediatek,mt7988-power-controller";
+			reg = <0 0x11d10000 0 0x10000>;
+			#clock-cells = <1>;
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		xs-phy@11e10000 {
+			compatible = "mediatek,mt7988-xsphy",
+				     "mediatek,xsphy";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			xphyu2port0: usb-phy@11e10000 {
+				reg = <0 0x11e10000 0 0x400>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			xphyu3port0: usb-phy@11e13000 {
+				reg = <0 0x11e13400 0 0x500>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+				mediatek,syscon-type = <&topmisc 0x218 0>;
+			};
+		};
+
 		clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
-- 
2.43.0